Fault finder: Vertical farm LED light scheduler

5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

LEDs flicker: what should I check?

Wiring is loose or the supply sags. Check connections and use thicker wires.

Shelf always on: what should I check?

A MOSFET is shorted or wired backwards.

Clock wrong after a power cut: what should I check?

The RTC battery is flat.

Nano gets hot: what should I check?

Running from 12 V on VIN is the limit. Use a small buck module to 5 V if it does.