Fault finder: UV exposure badge
6 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Reads zero outdoors: what should I check?
Check the I2C address and that the window is clear.
Reads very high indoors: what should I check?
Check the gain and the divide by 2300.
OLED blank: what should I check?
Check the I2C address and pins.
