Fault finder: USB macro keypad
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Wrong keys or ghosts: what should I check?
Check the diode direction and that all diodes are in.
Nothing typed: what should I check?
The Micro must be selected as a board and appear as a keyboard.
Knob jumps: what should I check?
Add a 10 nF capacitor on each encoder pin to ground.
Compile error on media keys: what should I check?
Use the key names listed in your HID-Project version.
