Fault finder: Matrix face animator
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing on the matrix: what should I check?
Check the board selection and that the upload finished.
Library not found: what should I check?
Install the UNO R4 Boards package.
Faces upside down: what should I check?
Rotate the board or reverse the row order.
Button double-steps: what should I check?
Increase the 40 millisecond lockout.
Blinks too fast: what should I check?
Raise the 3000 millisecond interval.
