Fault finder: Tank volume calculator

5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Jumping values: what should I check?

Keep the beam clear of walls and pipes.

Reads always 0: what should I check?

Check the 20 cm minimum distance.

No echo: what should I check?

Check the TRIG and ECHO wires.