Fault finder: Read GPS sentences over UART
5 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing printed: what should I check?
Check the TX wire goes to D4 and baud is 9600.
Garbage: what should I check?
Baud mismatch; check 9600.
No fix: what should I check?
Go outdoors with a clear sky and wait.
Time is not local: what should I check?
It is UTC; add 5 hours 30 minutes for India.
