Fault finder: Four-player quiz buzzer
9 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
A LED lights at power on: what should I check?
A button is stuck or its wire shorts to GND.
Two LEDs light: what should I check?
Check the wiring, only one should ever light.
Reset does nothing: what should I check?
Check the reset button goes to D11 and GND.
Buzzer silent: what should I check?
Use a passive buzzer with tone(), and check its polarity.
Same player always wins ties: what should I check?
Use port reading and a random pick for fairness.
