Fault finder: Transistor as a switch
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LED never lights: what should I check?
Transistor pin order is wrong. Check the datasheet for your package.
LED lit without pressing: what should I check?
Leakage from your fingers or the base floating. Add 100 kΩ from base to ground.
Meter reads zero current: what should I check?
Meter in the wrong socket or the fuse is blown.
Transistor gets warm: what should I check?
Collector current is too high. Use a larger load resistor.
