Fault finder: Traffic light with flip-flops

8 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Stuck on one state: what should I check?

Check the clock output and the supply.

Never returns to red: what should I check?

Check Q4 to reset wire.

Wrong lamp: what should I check?

Check the OR gate inputs.

Too fast: what should I check?

Use a larger timing capacitor.