Fault finder: Adjustable tone generator
7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Screen blank: what should I check?
Try address 0x3F and adjust the contrast screw.
No sound: what should I check?
Check the buzzer is passive and on D8.
Pitch jumps: what should I check?
Add a 100 nanofarad capacitor from A0 to GND.
Display flickers: what should I check?
Increase the 5 Hz change threshold.
Library not found: what should I check?
Install LiquidCrystal I2C from the Library Manager.
