Fault finder: ToF people flow counter
9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Sensor not found: what should I check?
Check XSHUT wiring and that only A is released first.
Counts the wrong way: what should I check?
Swap which sensor is A and B.
Counts twice: what should I check?
Lower the trigger distance or add a longer clear time.
