Fault finder: Blinking-colon clock

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Display blank: what should I check?

Check CLK and DIO and the library pins.

Wrong time at first: what should I check?

Set it with the two buttons.

Colon missing: what should I check?

Your module may have a different colon bit, try 0b11100000.

Clock not found: what should I check?

Check SDA and SCL and the module power.

Time drifts quickly: what should I check?

The clock battery is flat, replace it.