Fault finder: Tilt switch parcel handling flag
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Flags with no tip: what should I check?
Check the switch is mounted upright and the wires are firm.
Never flags: what should I check?
Tip further, or turn the switch so the ball rolls away in your direction of tilt.
Heartbeat missing: what should I check?
Check the LED direction and the resistor.
Reset does nothing: what should I check?
It only works while the box is upright.
Flags on a bump: what should I check?
Raise TIP_MS.
