Fault finder: Tilt alarm for a bag
7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Alarm never sounds: what should I check?
The switch was tilted already when arming finished, so the baseline is the tilted state.
Alarm sounds on its own: what should I check?
The switch bounces, move it to a steadier spot.
No sound at all: what should I check?
Check the buzzer polarity and that it is a passive type.
Cannot disarm: what should I check?
Hold the button for longer than a second.
Resets on its own: what should I check?
The battery is low.
