Fault finder: Four-channel thermocouple logger
11 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
All channels read NaN: what should I check?
Check the shared clock and data wires.
Only one channel works: what should I check?
Check each chip select pin.
SD fails: what should I check?
Format as FAT32 and check the SD chip select.
Readings noisy: what should I check?
Keep probe leads away from motors and mains cables.
