Fault finder: Tetris on a colour screen
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
White screen: what should I check?
Check CS, DC, RESET pins match the code and the backlight pin is on 3V3.
Picture upside down: what should I check?
Change setRotation to 2.
Flicker: what should I check?
Normal while redrawing the whole board; reduce by drawing only changed cells.
Pieces drift when rotated: what should I check?
Expected without wall kicks.
Buzzer silent: what should I check?
A passive buzzer is needed, and this needs core 2.0.x for ledcWriteTone.
