Fault finder: Control devices with a Telegram bot

9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No replies: what should I check?

Check the token and Wi-Fi.

Always not allowed: what should I check?

Check the chat ID, which is a number.

Relay works backwards: what should I check?

Change ACTIVE_LOW.

Temperature NaN: what should I check?

Check the DHT22 pull-up and wiring.