Fault finder: Talking weighing scale
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No speech: what should I check?
Check the SD card format, the MP3 folder and the 1 kΩ resistor on RX.
Wrong weight spoken: what should I check?
Re-calibrate with a known mass.
Speaks repeatedly: what should I check?
The weight is drifting. Keep the platform still.
Clips overlap: what should I check?
Increase the 3000 ms wait.
