Projects / Talking robot toy / Fault finder

Fault finder: Talking robot toy

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Triggers by itself: what should I check?

Turn the sound module's screw down or raise the clap threshold.

No sound: what should I check?

Check the SD card and the 1 kΩ resistor.

Servo twitches: what should I check?

Power it from the AA pack with a common ground.

Resets: what should I check?

Use fresh batteries.