Projects / Talking clock / Fault finder

Fault finder: Talking clock

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

Check the SD card format, the MP3 folder name and the 1 kΩ resistor on RX.

Clips overlap: what should I check?

The wait loop timed out. Increase the 4000 ms limit.

Wrong clip played: what should I check?

File names must be four digits and match the numbers in the sketch.

Time wrong: what should I check?

Set the DS3231 with its example sketch and check the coin cell.