Fault finder: Table call button and pager
11 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing arrives: what should I check?
Both sketches need WiFi.mode(WIFI_STA) before ESP-NOW starts.
Compile error about esp_now_recv_info_t: what should I check?
You are on core 2: use the older callback form.
Blank screen: what should I check?
Check GPIO 21 and 22 and try address 0x3D.
Table shows wrong number: what should I check?
Check TABLE_ID on each board.
Calls missed at a distance: what should I check?
Move closer, as ESP-NOW range indoors is limited.
