Projects / Sunrise alarm lamp / Fault finder

Fault finder: Sunrise alarm lamp

10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Fade starts at the wrong time: what should I check?

Set the DS3231 clock and check the alarm hour.

No light: what should I check?

Check DIN and the 5 V supply and that the ring ground is shared.

Flicker: what should I check?

Use a 2 A adapter and keep the capacitor in place.

Alarm not remembered: what should I check?

Press SET to leave the setting mode so it saves.