Fault finder: Step counter wristband

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Counts too many: what should I check?

Raise the threshold or the minimum gap.

Counts too few: what should I check?

Lower the threshold. A wrist swings less than a hip.

Display stays blank: what should I check?

Check the OLED address and wiring, and that it is the 128x32 type.

Battery drains fast: what should I check?

The display is on too long. Shorten displayUntil and add sleep.