Fault finder: Staircase lights that follow you

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Lights come on by themselves: what should I check?

Aim the PIRs away from windows and heaters.

Wrong direction: what should I check?

Swap the two PIR pins.

Strip flickers: what should I check?

Add the capacitor and the data resistor.

Last steps dim: what should I check?

Power the strip from both ends.