Fault finder: Stacker arcade game
5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Display upside down or mirrored: what should I check?
Rotate the modules or change the row mapping in render().
Only one matrix works: what should I check?
DOUT to DIN link is missing or the second module is not powered.
Dim or flickering: what should I check?
Use a good 5 V supply and short wires.
Button feels slow: what should I check?
Debounce with a short delay and keep the loop free of long delays.
