Fault finder: Sprout jar rinse timer

11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Time is wrong: what should I check?

Set the clock again with the RTClib example.

No reminder: what should I check?

Check RINSE_HOURS and that the clock is right.

Day count resets: what should I check?

Check the long press stored the start time.

Blank screen: what should I check?

Check the OLED wires and try address 0x3D.

No beep: what should I check?

Check you have a passive buzzer on D8.