Fault finder: Music-reactive LED strip
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Always full: what should I check?
Gain too high. Turn the trimmer anticlockwise, or raise 400 in map().
Never moves: what should I check?
Check OUT goes to A0 and the module has power. Clap close to it to test.
Flicker in silence: what should I check?
Raise 15 in map() to 30 to hide background noise.
