Projects / Sound effects board / Fault finder

Fault finder: Sound effects board

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No sound: what should I check?

Check the card is FAT32 and the files are named correctly.

Wrong sound: what should I check?

Check the order of the file names against the key order.

Keys do nothing: what should I check?

Check the keypad pin order.

Hiss: what should I check?

Add the 1 kΩ resistor and use a better supply.