Projects / Solar noon finder / Fault finder

Fault finder: Solar noon finder

13 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 13 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 13

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Never finds noon: what should I check?

Check both sensors are in sun and the stick's shadow touches them.

Readings jump: what should I check?

Shield the sensors from passing shade.

RTC not found message: what should I check?

Check the I2C wires.

Blank screen: what should I check?

Check the OLED wires and try address 0x3D.

Result is off: what should I check?

Re-do the calibration and check east and west.