Fault finder: Solar-powered model boat
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Motor does not start: what should I check?
Add the second panel or use a lighter propeller.
Boat tips: what should I check?
Move the panels lower and centre them.
Motor stops in water: what should I check?
Seal the shaft opening.
