Fault finder: Soil NPK reader over RS485

10 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No valid reply: what should I check?

Check A and B are not swapped and the baud and address match.

Garbage: what should I check?

Check the DE and RE control and the 5 V to 3.3 V divider.

Values all zero: what should I check?

The probe may need to be in wet soil.

OLED blank: what should I check?

Check I2C pins and address 0x3C.