Projects / Soft noise box / Fault finder

Fault finder: Soft noise box

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Only a buzz: what should I check?

Check the filter capacitor is fitted between the junction and GND.

No sound: what should I check?

Check the amplifier power and the speaker wires.

Too loud: what should I check?

Turn the pot down and check you have the pot in the signal path.

Hiss is too harsh: what should I check?

Add a second capacitor in parallel.

Button does nothing: what should I check?

Check it goes to D2 and GND.