Fault finder: Snake on an LED matrix
5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
The matrix stays dark: what should I check?
Check power and DIN, CLK and CS pins and that LedControl is installed.
The snake turns the wrong way: what should I check?
Swap the A0 and A1 signs, or rotate the joystick.
The picture is mirrored or rotated: what should I check?
Many 8 × 8 modules differ. Swap rows and columns in setLed.
Random food always lands in the same place: what should I check?
randomSeed needs a floating pin like A5 left unconnected.
