Fault finder: Sensor bridge to Home Assistant
5 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No codes: what should I check?
Check the antenna and wiring.
Short range: what should I check?
Use a longer wire antenna and power at 5 V through the divider.
Duplicate events: what should I check?
Lengthen the repeat window.
Sensors missing in Home Assistant: what should I check?
Check the broker and discovery topic.
