Fault finder: Light-following curtains

6 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Motor only buzzes: what should I check?

Swap one coil pair and check the power supply.

Curtain hunts back and forth: what should I check?

Widen the gap between the two lux levels.

Opens in the night: what should I check?

Raise OPEN_LUX or keep the after-05:00 rule.

Loses position: what should I check?

Reduce the speed and re-home each morning.