Fault finder: Smart cat fountain
10 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Pump never starts: what should I check?
Check the MOSFET orientation and the level sensor output.
Always low water: what should I check?
Move the sensor to the right height on the tank wall.
False visits: what should I check?
Aim the PIR away from windows.
No alert: what should I check?
Check the Wi-Fi details and webhook address.
