Fault finder: Balcony garden rain cover
10 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Cover never closes: what should I check?
Adjust WET_BELOW and check the plate wiring.
Servo hums at the end: what should I check?
The limit switch did not trigger. Move it or reduce the angle.
Servo twitches: what should I check?
Add the capacitor and a proper 5 V supply.
Cover opens too soon: what should I check?
Increase the dry wait.
