Fault finder: Society dustbin full-level reporter

8 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Reads always out of range: what should I check?

Check the echo divider and the supply voltage.

Resets while sending: what should I check?

Add capacitance or a stronger regulator.

Wrong percentage: what should I check?

Re-measure the empty and full distances.

No data on the page: what should I check?

Check the server address and that the PC is on the same network.