Fault finder: Giant floor Simon game

8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Pads trigger by themselves: what should I check?

Raise THRESH and check the 10 kΩ resistors.

Strip flickers: what should I check?

Add the 1000 µF capacitor and the data resistor.

Two pads react together: what should I check?

Check they are mounted separately and not touching.

Nano resets: what should I check?

Power the strip from the adapter, not from the Nano.