Fault finder: Simon memory game
7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Same sequence every game: what should I check?
Leave A0 unconnected: the random seed comes from it.
A button counts twice: what should I check?
The code waits for release. Check the button is not sticking.
Buzzer silent: what should I check?
Use a passive buzzer. An active one only clicks with tone().
