Fault finder: Shift register LED bar

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Extra bits shift in: what should I check?

A button bounces. Check each 100 nF and 10 kΩ and the 74HC14 pin numbers.

LEDs show a random pattern at power up: what should I check?

This is normal, the 595 powers up undefined. Shift in eight bits and latch.

Some LEDs never light: what should I check?

Check the LED direction and the 330 Ω resistor on that output.

Pattern is reversed: what should I check?

The first bit you clock in ends up at QH. That is the nature of a shift register.