Fault finder: Shadow puppet theatre light

8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Colours flicker or are wrong: what should I check?

Check common ground and the data resistor.

No light: what should I check?

Check DIN is the input and the 5 V supply.

Buttons do nothing: what should I check?

Check each goes to ground when pressed.

Fade too slow or fast: what should I check?

Change the 0.03 value in the code.