Fault finder: Giant 7-segment wall clock
6 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Wrong segments light: what should I check?
Change the segment order or the DIGITS table.
Dim far end: what should I check?
Add power at the other end.
No time: what should I check?
Check Wi-Fi and NTP, or read the RTC.
Flicker: what should I check?
Check the capacitor and the ground connection.
