Fault finder: Serial chat between two boards

5 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing received: what should I check?

Check the cross wiring and the shared ground.

Garbled text: what should I check?

Both boards must use 9600 baud.

Only one direction works: what should I check?

Check the other crossed wire.

Messages join together: what should I check?

Set the serial monitor line ending to Newline.

Upload fails: what should I check?

The link uses pins 10 and 11, not 0 and 1, so check the board and port.