Fault finder: Sensor fault detector

11 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Always disagree: what should I check?

One sensor next to the ESP32 or in the sun: place them together.

DS18B20 −127: what should I check?

Missing 4.7 kΩ pull-up.

Stuck alarm in very stable rooms: what should I check?

Raise the stuck count or compare the second decimal.