Fault finder: 4-digit clock
7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Display blank: what should I check?
Check CLK and DIO are not swapped and the pin numbers match the code.
Shows 8888 or random segments: what should I check?
Loose header: press the module firmly into the breadboard.
Time wrong after unplugging: what should I check?
Expected: the Uno has no clock battery. Add a DS3231 RTC.
