Fault finder: Ultrasonic room intrusion
10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Always alarms: what should I check?
Check the sensor sees a solid surface and raise CHANGE_CM.
Never alarms: what should I check?
Aim the sensor across the path and lower CHANGE_CM.
Distance jumps: what should I check?
Soft or angled surfaces; aim at a wall.
Buzzer silent: what should I check?
Check it is an active buzzer on D6.
