Fault finder: Smart locker with PIN and log

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Latch does not move: what should I check?

Check MOSFET pins and the 12 V supply.

Keys misread: what should I check?

Check the row and column order.

No log lines: what should I check?

Format the card as FAT32 and check CS.

Wrong time: what should I check?

Reset the RTC.