Fault finder: Mailbox alert
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Wakes constantly: what should I check?
Check the pull-up and the magnet position.
No message: what should I check?
Check both units use the same package version and are in range.
Short battery life: what should I check?
Measure sleep current and remove power LEDs.
Never wakes: what should I check?
Check the wake level and the GPIO number.
