Fault finder: Smart garage door controller

9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Relay clicks but the door ignores it: what should I check?

Check the terminals and the press time.

Wrong state: what should I check?

Flip the reed logic or move the magnet.

No page: what should I check?

Check Wi-Fi details and the IP address.

Door moves unexpectedly: what should I check?

Remove the controller and check the opener.